- Mains powered with battery backup
- RF Wireless interconnect
- Supports wireless remote control
- Remote Test – Test alarms
- Remote Locate – Identify triggered alarms
- Remote Silence – Silence alarms
- Proprietary RadioLINK protocol
- Certified to AS/NZS4268:2012
Brooks Wireless Interconnection Base to suit 140RC series only (230-volt)
$119.00 + GST
The EIB168RC RadioLINK™ base houses a Brooks RadioLINK™ module which transmits a Radio Frequency (RF) alarm signal when the unit attached to it is triggered. When an RF alarm signal is received from another RadioLINK™ enabled device, the attached smoke or heat alarm will sound. It therefore eliminates the need to run interconnect wires between all the smoke alarms on different floors and in different rooms.
It is designed for use with the EiB140RC series of Mains Powered Smoke/Heat Alarms. The RadioLINK™ base itself, is also mains powered and has a rechargeable lithium battery for back-up in the event of mains failure. The RadioLINK™ base will normally be wired to the nearest mains circuit in the ceiling (usually the lighting circuit). The Smoke/Heat Alarm is then slid on to the RadioLINK™ base rather than to its normal mounting plate. As many as 12 units can be interconnected in this way.